Đồng hồ đo Kyoritsu , Thiết bị đo Kyoritsu , Đồng hồ đo Kew Kyoritsu , Thiết bị đo Kew Kyoritsu : Thiết bị đo đa năng Kyoritsu 6016, K6016

Thiết bị đo đa năng Kyoritsu 6016, K6016

Mã sản phẩm: 6016

Giá bán : Liên hệ

Hãng sản xuất: Kyoritsu - Nhật

Bảo hành: 12 tháng

Tình trạng: Còn hàng

Số lượng:

Chia sẻ sản phẩm này với bạn bè:

THÔNG SỐ KỸ THUẬT:

Chỉ thị số
Đo thông mạch, đo mạch vòng, đo điện trở đất...
Kiểm tra liên tục: 20, 200, 2000Ω
Đo điện trở cách điện: 20, 200, 2000MΩ
Đo tổng trở vòng lặp: 20Ω, 200Ω, 2000Ω
Thử dòng dò RCD: 10, 30, 100, 300, 500, 1000mA
Đo điện trở đất: 20/200/2000Ω
ĐO thứ tự pha: 50-500V 50/60Hz
Đo điện áp : 25~500V
Bảo hành : 12 tháng
Hãng sản xuất : Kyoritsu - Nhật
Xuất xứ : Nhật

Continuity Measurement

Continuous testing can be carried out by use of the test button lockdown feature. A selectable buzzer gives instantaneous indication of continuity. Null facility eliminates the test lead resistance from the results, the nulled value is retained even if the instrument is switched off. Live circuit warnings are given by a flashing LED, buzzer and indication on the display.

Insulation Measurement

Three selectable test voltages 250V, 500V and 1000V. An auto-discharge function ensures that circuits are not hazardous after testing. A red LED gives warning of high voltage output during testing and discharging of the circuit. In case of connecting to a live circuit, a live circuit warning is given by flashing LED, buzzer and indication on the display.

Loop Impedance Measurement

A patented (ATT) low current loop impedance test enables high accuracy loop measurements and quick testing without tripping RCD

A high current alternative is selectable for even higher accuracy and instantaneous results. The subsequent test will default to the low current test, this saves any inadvertent tripping of the RCD. The KEW 6016 allows also for phase to phase loop tests.

Thiết bị đo đa chức năng Thiết bị đo nội trở Kyoritsu 6201A, K6201A Thiết bị đo đa năng Kyoritsu 6018, K6018 Thiết bị đo đa năng Kyoritsu 6010B, K6010B Thiết bị đo đa năng Kyoritsu 6011A, K6011A Thiết bị đo đa năng Kyoritsu 6016, K6016 Thiết bị đo phân tích công suất Kyoritsu 6305,K6305 Thiết bị đo phân tích công suất Kyoritsu 6315 ,K6315

PSC / PFC Measurement

The Prospective Short Circuit Current (PSC) and Prospective Fault Current (PFC) are automatically calculated and shown on the display. As loop testing, the function has low and high test current options with the default to low current to avoid inadvertent tripping of RCDs.

RCD Measurement

The KEW 6016 has a comprehensive RCD test feature for RCD type AC (Alternative Currents), RCD type A (Pulsating Direct Currents), General and Selective (delayed).

Measures at 1/2x, 1x, 5x of nominal RCD current. It also has Ramp Test and Auto test where all results are shown on one screen. Touch voltage limit can be selected for 25V or 50V depending on application.

Earth Measurement

Using the classical Volt-Amper method with two auxiliary earth spikes and without external power source. All test leads and spikes are supplied as standard accessories.

Phase rotation

KEW 6016 can check the phase rotation of three phase lines with clear indication of the sequence on the display.

Voltage Measurement

In addiction to the voltage measurement, this function gives also the Frequency of the voltage under test.

Continuity

Range

|20/200/2000Ω (Auto-ranging)

Open circuit voltage (DC)

|5V±20% (*1)

Short circuit current

|Greater than 200mA

Accuracy

|±0.1Ω (0~0.19Ω)
|±2%rdg+8dgt (0.2~2000Ω)

Insulation Resistance

Range

|20/200MΩ
|(Auto-ranging)

|20/200/2000MΩ (Auto-ranging)

Open circuit voltage (DC)

|250V+25% -0%

|500V+25% -0%

|1000V+20% -0%

Rated current

|1mA or greater
|@ 250kΩ

|1mA or greater
|@ 500kΩ

|1mA or greater
|@ 1MΩ

Accuracy

|±2%rdg+6dgt (0~19.99MΩ)
|±5%rdg+6dgt (20~200MΩ)

|±2%rdg+6dgt (0~199.9MΩ)
|±5%rdg+6dgt (200~2000MΩ)

Loop Impedance

Function

|L-PE

|L-PE (ATT)

|L-N / L-L

Rated Voltage

|100~260V 50/60Hz

|L-N: 100~300V
|L-L: 300~500V 50/60Hz

Nominal Test Current at 0Ω External Loop: Magnitude / Duration (*2)

|20Ω: 6A/20ms
|200Ω: 2A/20ms
|2000Ω: 15mA/500ms

|L-N: 6A/60ms
|N-PE: 10mA/approx. 5s

|20Ω: 6A/20ms

Range

|20/200/2000Ω
|(Auto-ranging)

|20/200/2000Ω
|(Auto-ranging)
|(L-N < 20Ω)

|20Ω

Accuracy

|±3%rdg+4dgt (*3)
|±3%rdg+8dgt (*4)

|±3%rdg+6dgt (*3)
|±3%rdg+8dgt (*4)

|±3%rdg+4dgt (*3)
|±3%rdg+8dgt (*4)

PSC (L-N / L-L) / PFC (L-PE)

Function

|PSC

|PFC

|PFC (ATT)

Rated Voltage

|100~500V 50/60Hz

|100~260V 50/60Hz

Nominal Test Current at 0Ω External Loop: Magnitude / Duration (*5)

|6A/20ms

|6A/20ms
|2A/20ms
|15mA/500ms

|L-N: 6A/60ms
|N-PE: 10mA/approx. 5s

Range

|2000A/20kA Auto-Ranging

Accuracy

|PSC / PFC accuracy is derived from measured loop impedance
|specification and measured voltage specification

RCD

Function

|X1/2

|X1

|X5

|Ramp

|Auto

Trip current setting

|10/30/100/300/
|500/1000mA

|10/30/
|100mA

|10/30/
|100/300/
|500mA

Trip current Duration

|2000ms

|G: 550ms
|S: 1000ms

|410ms

|Goes up by
|10% from 20% to
|110%
|G:300ms/
|S:500ms
|X10 times

Rated Voltage

|230V+10%-15% 50/60Hz

Accuracy

|AC Type:
|-8%~-2%
|A Type:
|-10%~0%

|AC Type: +2%~+8%
|A Type: 0%~+10%

|AC Type: ±4%
|A Type: ±10%

|Trip time: ±1%rdg+3dgt

RCD (Uc)

Function

|UC

Rated Voltage

|230V+10%~15% 50/60Hz

Range

|100.0V

Test current

|≤ 1/2IΔn (max150mA)

Accuracy

|+5%~+15%rdg, ±8dgt

Earth

Range

|20/200/2000Ω Auto-Ranging

Accuracy

|20Ω: ±3%rdg+0.1Ω
|200/2000Ω: ±3%rdg+3dgt (Auxiliary earth resistance 100±5%)

Phase Rotation

Rated voltage

|50-500V 50/60Hz

Remarks

|Correct phase sequence: are displayed "1.2.3" and

mark
|Reversed phase sequence: are displayed "3.2.1" and

mark

Volts

Function

|Volts

|Frequency

Rated voltage

|25~500V, 45~65Hz

Measuring range

|25~500V

|45~65Hz

Accuracy

|±2%rdg+4dgt

|±0.5%rdg+2dgt

General

Applicable standards

|IEC 61010-1 CAT.III 300V (500V L to L) Pollution degree 2, IEC 61010-031,
|IEC 61557-1, 2, 3, 4, 5, 6, 7, 10, IEC 60529 (IP40), IEC 61326 (EMC)

Power source

|LR6 X 8

Dimensions

|136(L) X 235(W) X 114(D)mm

Weight

|1350g (including batteries.)

Accessories

Optional

|8212-RS232C (RS232C adaptor with KEW Report (Software))

(*1):	Voltages are output when measurement resistance is under 2100 ohm.
(*2):	at 230V
(*3):	230V+10%-15%
(*4):	voltages except for (*3)
(*5):	at 230V
(*6):	7187A (Power cord [UK]), 7221A (Power cord [SA]), 7222A (Power cord [AU])