Đồng hồ đo Kyoritsu , Thiết bị đo Kyoritsu , Đồng hồ đo Kew Kyoritsu , Thiết bị đo Kew Kyoritsu : Thiết bị ghi dữ liệu

Thiết bị ghi dữ liệu - Dòng dò Kyoritsu 5020

Mã sản phẩm: 5020

Giá bán : Liên hệ

Hãng sản xuất: Kyoritsu - Nhật

Bảo hành: 12 tháng

Tình trạng: Còn hàng

Số lượng:

Chia sẻ sản phẩm này với bạn bè:

THÔNG SỐ KỸ THUẬT:

True RMS
Chế độ ghi bình thường:
+ Giải đo : 100mA
+ Độ chính xác : ±2.0%rdg±5dgt
+ Độ chính xác có cảm biến :|±2.0%rdg±10dgt
Chế độ ghi khởi động :
+ Giải đo : 100mA
+ Độ chính xác : ±3.5%rdg±5dgt
+ Độ chính xác có cảm biến :|±3.5%rdg±10dgt
Chế độ ghi thu thập, phân tích chất lượng
+ Giải đo : 100mA
+ Độ chính xác : ±3%rdg±5dgt
+ Độ chính xác có cảm biến :|±3.0%rdg±10dgt
Đầu vào : AC
Số kênh : 3
Trở khánh : 50MΩ
Nguồn : DC 6V - LR6 × 4
Kích thước :111 (L) × 60 (W) × 42 (D) mm
Khối lượng : 265g
Phụ kiện : Pin, cáp USB, CD, bao đựng
Bảo hành : 12 tháng
Hãng sản xuất : Kyoritsu - Nhật
Xuất xứ : Nhật

	3 channel inputs for the simultaneous recording of Leakage Current, Load Current and Voltage
•	Power Quality analysis (only on KEW 5020) (Power Quality:Reference voltage, Swell, Dip, Short power Interruptions)

	Large Capacity for storing 60,000 data points
	60,000 data points can be recorded when 1ch is used, and when all the three channels are used, 20,000 data points per channel can be recorded

Lowpass Filter will filter out the harmonics
(Cutoff Frequency = Approx. 160Hz)

LED flickers when the preset current / voltage value is exceeded

	CALL: Confirmation of recorded data
•	The following can be displayed: number of recorded data points, (max+ min+ peak) value for each channel complete with time/date information in the Normal recording mode. (Detected values (i.e. when values are outside preset limits ) can be displayed in other recording modes)
•	RECALL: The last 10 recorded data points including time/date can be recalled on the logger display

Thiết bị kiểm tra dòng dò Thiết bị kiểm tra dòng rò Kyoritsu 4118A , K4118A Thiết bị kiểm tra dòng rò Kyoritsu 4140 , K4140 Thiết bị kiểm tra dòng rò RCD Kyoritsu 5406A, K5406A Thiết bị kiểm tra RCD Kyoritsu 5410, K5410 Thiết bị ghi dữ liệu - Dòng rò Kyoritsu 5010, K5010 Thiết bị ghi dữ liệu - Dòng dò Kyoritsu 5020


	Selection of One-time mode or Endless mode
•	One-time on: Recording will stop when memory is used up
•	One-time off: Overwrite the old data, and store the latest data

	Non Volatile Memory
	Recorded data will be retained even if the batteries are exhausted or replaced due to the presence of a nonvolatile memory (guaranteed for 10 years)

	Battery power indicator
	Indicates battery voltage in 4-levels (It is possible to use the logger for a further approx. 24 hours even after the warming symbol is flashing)

	The userfriendly PC software "KEW LOG Soft 2" is supplied
•	Supplied with the user friendly software "KEW LOG Soft 2". This permits editing, analysis and graphical display of data.
•	The recorded data is downloadable onto a PC via USB cable.
•	Variation of the measured voltage and current data can be confirmed simultaneously on the PC display monitor. (only on KEW 5020)
•	Simplified Power Integration (The "KEW LOG Soft 2" uses current and voltage recorded to calculate the integral power consumption)
•	Continuous measuring time: Approx. 10 days (Alkaline Battery)

Normal Recording Mode
(AC 50/60Hz, Sine wave, Input: 10% or more of the range at CH1)

Range	RMS Accuracy
100.0mA	\|±2.0%rdg±0.9%f.s.+ Accuracy of Sensor
Other ranges	\|±1.5%rdg±0.7%f.s.+ Accuracy of Sensor
Crest Factor	\|2.5 or less: RMS accuracy (sine) + 2%rdg + 1%f.s.

*Max, Min and Instant Peak values in Normal Recording mode are just reference values:
their accuracies aren't guaranteed.

Trigger Recording Mode (AC 50/60Hz sine wave)

Range	Accuracy
100.0mA	\|±3.5%rdg±2.2%f.s.+ Accuracy of Sensor
Other ranges	\|±3.0%rdg±2.0%f.s.+ Accuracy of Sensor

Capture/Power Quality Analysis Recording Mode

Range	Accuracy
100.0mA	\|±3.0%rdg±1.7%f.s.+ Accuracy of Sensor
Other ranges	\|±2.5%rdg±1.5%f.s.+ Accuracy of Sensor

KEW 5010

KEW 5020

Recording Mode

Normal, Trigger, Capture

Normal, Trigger, Capture, Power Quality Analysis

Operating System

Successive Approximation
(CH1 single synchronized sampling)

Rated max. working voltage

AC 9.9Vrms, 14V peak value

Number of input channel

3ch

Measuring method

True RMS

RMS measuring interval

approx. 100ms

Sampling interval

Normal/Trigger mode

approx. 1.65ms/CH

Capture mode

approx. 0.55ms (waveform: at every 1.1ms)

P.Q.A. mode

approx. 0.55ms

Low battery warning

Battery mark display (in 4 levels)

Over-range indication

"OL" mark is displayed when exceeding the measuring range

Auto power off

Power-off function operates automatically after a switch remains for 3min. (when recording is stopped)

Location for use

Indoor use, Altitude up to 2000m

Operating temperature & humidity range

-10ºC~50ºC / Relative humidity 85% or less (no condensation)

Battery

DC6V: Alkaline battery (LR6) ×4pcs / External supply DC9V (Special AC Adapter)

Possible measurement time

Approx. 10 days (with alkaline LR6 batteries)

Applicable standards

IEC 61010-1:2001 CAT.III 300V Pollution degree2
IEC 61326 (EMC standard)

Withstand voltage

AC 3540V (RMS 50/60Hz) / for 5 sec.

Dimension

111(L)×60(W)×42(D)mm

Weight

Approx. 265g

Accessories

Alkaline battery LR6×4pcs, 9118 (Carrying case)
PC software "KEW LOG Soft 2", 7148 (USB cable)
Instruction manual, Quick manual, Install manual,
USB Notice sheet

Optional

8146/8147/8148 (Leakage & Load current Clamp Sensor),
8121/8122/8123 (Load current Clamp Sensor),
8129 (Flexible Clamp Sensor),
8309 (Voltage Sensor: only KEW 5020), 8320 (AC Adapter),
9135 (Carrying bag), 9119 (Hard carry case),
7185 (Extension cable for sensor)

Cataloge