Thiết bị đo phân tích công suất Kyoritsu 6305,K6305

• 

Thiết bị đo đa năng Kyoritsu 6016, K6016

Mã sản phẩm: 6016

Giá bán :  Liên hệ

Hãng sản xuất: Kyoritsu - Nhật

Bảo hành: 12 tháng

Tình trạng: Còn hàng

Số lượng:

Chia sẻ sản phẩm này với bạn bè:

THÔNG SỐ KỸ THUẬT:

Chỉ thị số
 Đo thông mạch, đo mạch vòng, đo điện trở đất...
Kiểm tra liên tục: 20, 200, 2000Ω
Đo điện trở cách điện: 20, 200, 2000MΩ
Đo tổng trở vòng lặp: 20Ω, 200Ω, 2000Ω
Thử dòng dò RCD: 10, 30, 100, 300, 500, 1000mA
Đo điện trở đất: 20/200/2000Ω
ĐO thứ tự pha: 50-500V 50/60Hz
Đo điện áp : 25~500V
Bảo hành : 12 tháng
Hãng sản xuất : Kyoritsu - Nhật
Xuất xứ : Nhật

Continuity Measurement Continuous testing can be carried out by use of the test button lockdown feature. A selectable buzzer gives instantaneous indication of continuity. Null facility eliminates the test lead resistance from the results, the nulled value is retained even if the instrument is switched off. Live circuit warnings are given by a flashing LED, buzzer and indication on the display. Insulation Measurement Three selectable test voltages 250V, 500V and 1000V. An auto-discharge function ensures that circuits are not hazardous after testing. A red LED gives warning of high voltage output during testing and discharging of the circuit. In case of connecting to a live circuit, a live circuit warning is given by flashing LED, buzzer and indication on the display. Loop Impedance Measurement A patented (ATT) low current loop impedance test enables high accuracy loop measurements and quick testing without tripping RCD A high current alternative is selectable for even higher accuracy and instantaneous results. The subsequent test will default to the low current test, this saves any inadvertent tripping of the RCD. The KEW 6016 allows also for phase to phase loop tests. PSC / PFC Measurement The Prospective Short Circuit Current (PSC) and Prospective Fault Current (PFC) are automatically calculated and shown on the display. As loop testing, the function has low and high test current options with the default to low current to avoid inadvertent tripping of RCDs. RCD Measurement The KEW 6016 has a comprehensive RCD test feature for RCD type AC (Alternative Currents), RCD type A (Pulsating Direct Currents), General and Selective (delayed). Measures at 1/2x, 1x, 5x of nominal RCD current. It also has Ramp Test and Auto test where all results are shown on one screen. Touch voltage limit can be selected for 25V or 50V depending on application. Earth Measurement Using the classical Volt-Amper method with two auxiliary earth spikes and without external power source. All test leads and spikes are supplied as standard accessories. Phase rotation KEW 6016 can check the phase rotation of three phase lines with clear indication of the sequence on the display. Voltage Measurement In addiction to the voltage measurement, this function gives also the Frequency of the voltage under test.

Continuity Range |20/200/2000Ω (Auto-ranging) Open circuit voltage (DC) |5V±20% (*1) Short circuit current |Greater than 200mA Accuracy |±0.1Ω (0~0.19Ω) |±2%rdg+8dgt (0.2~2000Ω) Insulation Resistance Range |20/200MΩ |(Auto-ranging) |20/200/2000MΩ (Auto-ranging) Open circuit voltage (DC) |250V+25% -0% |500V+25% -0% |1000V+20% -0% Rated current |1mA or greater |@ 250kΩ |1mA or greater |@ 500kΩ |1mA or greater |@ 1MΩ Accuracy |±2%rdg+6dgt (0~19.99MΩ) |±5%rdg+6dgt (20~200MΩ) |±2%rdg+6dgt (0~199.9MΩ) |±5%rdg+6dgt (200~2000MΩ) Loop Impedance Function |L-PE |L-PE (ATT) |L-N / L-L Rated Voltage |100~260V 50/60Hz |L-N: 100~300V |L-L: 300~500V 50/60Hz Nominal Test Current at 0Ω External Loop: Magnitude / Duration (*2) |20Ω: 6A/20ms |200Ω: 2A/20ms |2000Ω: 15mA/500ms |L-N: 6A/60ms |N-PE: 10mA/approx. 5s |20Ω: 6A/20ms Range |20/200/2000Ω |(Auto-ranging) |20/200/2000Ω |(Auto-ranging) |(L-N < 20Ω) |20Ω Accuracy |±3%rdg+4dgt (*3) |±3%rdg+8dgt (*4) |±3%rdg+6dgt (*3) |±3%rdg+8dgt (*4) |±3%rdg+4dgt (*3) |±3%rdg+8dgt (*4) PSC (L-N / L-L) / PFC (L-PE) Function |PSC |PFC |PFC (ATT) Rated Voltage |100~500V 50/60Hz |100~260V 50/60Hz | Nominal Test Current at 0Ω External Loop: Magnitude / Duration (*5) |6A/20ms |6A/20ms |2A/20ms |15mA/500ms |L-N: 6A/60ms |N-PE: 10mA/approx. 5s Range |2000A/20kA Auto-Ranging Accuracy |PSC / PFC accuracy is derived from measured loop impedance |specification and measured voltage specification RCD Function |X1/2 |X1 |X5 |Ramp |Auto Trip current setting |10/30/100/300/ |500/1000mA |10/30/ |100mA |10/30/ |100/300/ |500mA |Depending on the |accuracy at each |function. |Measurement sequence: |X1/2 0°→X1/2 180° |→X1 0°→X1 180° |→X5 0°→X5 180° |Measurements with |x5 are not carried out |for RCDs with |nominal current of |100mA or more. Trip current Duration |2000ms |G: 550ms |S: 1000ms |410ms |Goes up by |10% from 20% to |110% |G:300ms/ |S:500ms |X10 times Rated Voltage |230V+10%-15% 50/60Hz Accuracy |AC Type: |-8%~-2% |A Type: |-10%~0% |AC Type: +2%~+8% |A Type: 0%~+10% |AC Type: ±4% |A Type: ±10% |Trip time: ±1%rdg+3dgt RCD (Uc) Function |UC Rated Voltage |230V+10%~15% 50/60Hz Range |100.0V Test current |≤ 1/2IΔn (max150mA) Accuracy |+5%~+15%rdg, ±8dgt Earth Range |20/200/2000Ω Auto-Ranging Accuracy |20Ω: ±3%rdg+0.1Ω |200/2000Ω: ±3%rdg+3dgt (Auxiliary earth resistance 100±5%) Phase Rotation Rated voltage |50-500V 50/60Hz Remarks |Correct phase sequence: are displayed "1.2.3" and  mark |Reversed phase sequence: are displayed "3.2.1" and  mark Volts Function |Volts |Frequency Rated voltage |25~500V, 45~65Hz Measuring range |25~500V |45~65Hz Accuracy |±2%rdg+4dgt |±0.5%rdg+2dgt General Applicable standards |IEC 61010-1 CAT.III 300V (500V L to L) Pollution degree 2, IEC 61010-031, |IEC 61557-1, 2, 3, 4, 5, 6, 7, 10, IEC 60529 (IP40), IEC 61326 (EMC) Power source |LR6 X 8 Dimensions |136(L) X 235(W) X 114(D)mm Weight |1350g (including batteries.) Accessories |7188A (Distribution board fuse test lead set) |7196A (Test leads with remote control switch) |7218A (Power cord [EU]) (*6) |7228A (Earth resistance test leads) |8032 (Auxiliary earth spikes) |8212-USB (USB adaptor with KEW Report (Software)) |9142 (Carrying case) |9121 (Shoulder strap) |Cord case, Buckle, Battery, Instruction manual Optional |8212-RS232C (RS232C adaptor with KEW Report (Software)) (*1): Voltages are output when measurement resistance is under 2100 ohm. (*2): at 230V (*3): 230V+10%-15% (*4): voltages except for (*3) (*5): at 230V (*6): 7187A (Power cord [UK]), 7221A (Power cord [SA]), 7222A (Power cord [AU])

Xin vui lòng liên hệ để được hỗ trợ tốt nhất

Công ty cổ phần thiết bị điện Hoàng Phương

Địa chỉ: Số 19, ngõ 44, phố Võ Thị Sáu ,P.Thanh Nhàn ,

Q.Hai Bà Trưng , TP Hà Nôi.
MST: 0106798886

Tel: 04.3215.1322

Fax: 04.3215.1323

Email  : Kinhdoanh2.hpe@gmail.com

Skype: kinhdoanh2.hpe@gmail.com

Website http://hoangphuongjsc.com